How to Use the Parking Card

Using a Parking Card in a parking meter

Insert the card into the angled meter slot.
Make sure the gold chip is on the left side, face-down.
The parking meter will display the dollar value that remains on the card.
Depending on the rate, the parking meter will begin to log pre-programmed time increments--at a cost of $0.25 each--until the card is removed from the slot. The cost will be debited from the card. Be sure to note the meter's maximum time limit: one hour for a meter with a grey top, and two hours for a meter with a green top.
Remove the card when you have logged enough time or when the meter reaches its maximum.

Determine the length of parking time you require for your stay.
Insert your Parking Card horizontally, chip facing upwards in the designated slot. (On site, insert the Parking Card according to the diagram on the machine)
Press the black button slowly to add $1.00 increments to your transaction until you have reached your desired amount. (The fee and time until which you will be allocated to park will be displayed on the screen)
Press the GREEN BUTTON to confirm your transaction.
Take the ticket from the slot.
(Lower right hand corner of the machine)
Remove your Parking Card from the slot.
Return to your vehicle and display the ticket face-up on the dashboard.

NOTE:
You may CANCEL a transaction any time before pressing the green button. The cancel button is located immediately beneath the coin slot.

Insert your entry ticket into the entry ticket slot - the amount owed will be displayed on the screen.
Insert your Parking Card, chip facing left, into the card slot. Leave your card in the slot until prompted by the screen to remove it.
Take the exit ticket.
Proceed to your vehicle to exit the facility.